Honda Civic manuals

Honda Civic Owners Manual: Manual Operation

Manual Operation

Rotating the light switch turns the lights on and off, regardless of the power mode setting or position of the ignition switch.

High beams

Push the lever forward until you hear a click.

Low beams

When in high beams, pull the lever back to return to low beams.

Flashing the high beams

Pull the lever back, and release it.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.

Models with smart entry system

If you leave the power mode in VEHICLE OFF (LOCK) while the lights are on, a chime sounds when the driver’s door is opened.

Models without smart entry system

If you remove the key from the ignition switch while the lights are on, a chime sounds when the driver’s door is opened.

When the lights are on, the lights on indicator in the instrument panel will be on

Lights On Indicator

Do not leave the lights on when the engine is off because it will cause the battery to discharge.

If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer.

Light Switches
...

Automatic Operation (automatic lighting control)
Automatic lighting control can be used when the ignition switch is in ON *1. When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automati ...

See also:

Honda Civic Owners Manual. Emissions Testing
Testing of Readiness Codes Your vehicle has readiness codes as part of the onboard self diagnostic system. Some States use these codes for testing to verify whether your vehicle's emissions components are working properly. The codes may not be read properly if testing is performed just a ...

© 2016-2019 Copyright www.hocivic.com

0.0051